Generation/Re-Generate very slow

Maxim
Site Admin
Posts: 858
Joined: 02 Mar 2009, 17:02

Re: Generation/Re-Generate very slow

Post by Maxim » 23 Jan 2017, 18:25

OK, looks like I got it. Please download the new version:

http://www.exisoftware.com/download.html

Please try it and let me know if it's faster now.

Red Barchetta
Posts: 14
Joined: 27 Sep 2016, 20:45

Re: Generation/Re-Generate very slow

Post by Red Barchetta » 02 Feb 2017, 07:57

While I was re-generating last weekend, my PC, an AMD Phenom II x4 3.4Ghz version w/8gig DDR2 memory died. Not sure if it will help, but I have ordered an ASUS TUF Sabertooth 990FX motherboard, AMD FX-8350 Black Edition 8-Core 4ghz AMD3+ Processor and 16gig of DDR3 memory. Guess I am wondering if having 8 cores over the 4 core will improve the performance of the Generation? I am sure the faster FSB will help some.

Red Barchetta
Posts: 14
Joined: 27 Sep 2016, 20:45

Re: Generation/Re-Generate very slow

Post by Red Barchetta » 05 Feb 2017, 01:00

1st attempt with the new computer, Regeneration of everything. Auto Columns x 3 rows. Results in mm:ss

Step 1 of 5: ? too fast
Step 2 of 5: 22:27 for 22:27
Step 3 of 5: 38:46 for 16:18
Step 4 of 5: ? too fast
Step 5 of 5: 43:41 for 5:05

Result was a single thumbs page.

Making only a structure change to create the generation needed as described previously 6 Columns x 3 rows. Re-generate all gallery pages is the only selection.

Step 1 of 5: n/a
Step 2 of 5: n/a
Step 3 of 5: n/a
Step 4 of 5: n/a
Step 5 of 5: 4:13 total

Result was 72 thumbs pages.

Maxim
Site Admin
Posts: 858
Joined: 02 Mar 2009, 17:02

Re: Generation/Re-Generate very slow

Post by Maxim » 05 Feb 2017, 02:00

Do you have version 2.0.1 installed?

Red Barchetta
Posts: 14
Joined: 27 Sep 2016, 20:45

Re: Generation/Re-Generate very slow

Post by Red Barchetta » 10 Feb 2017, 19:29

Yes, and time for step 5 went from appx 10 hours to appx 4 min. Very good speed increase!

Maxim
Site Admin
Posts: 858
Joined: 02 Mar 2009, 17:02

Re: Generation/Re-Generate very slow

Post by Maxim » 10 Feb 2017, 21:47

Glad I could help! Please do not hesitate to write with any questions or problems!

Post Reply